Photos: Courtesy of Unilock®

Pisa II®

Colors Available Beechwood Charcoal Granite St. Clair Nevada Rustic Red     Sandstone

Tapered 8" x 6" x 12"	Corner 12" x 6" x 8"	Revers-A-Cap 8" x 3" x 14" x 7"	12" Coping 12" x 3" x 12 "

Tame a steep slope and create a beautiful focal point with Pisa 2®.

The built-in setback design of Pisa2® automatically forms the correct slope, ensuring a highly stable retaining wall. Utilizing the product's tapered components, you can form curved walls and steps.It has a split finish and is built for gardens, retaining walls, steps, and pillar applications.

Colors: Beechwood, Charcoal, Granite, Nevada, Rustic Red, Sandstone, St. Clair

Notes: Tapered units will allow for a minimum 5ft. outside radius. Revers-a-cap units, minimum 8ft radius. Higher walls can be achieved using geogrid reinforcement. Revers-a-cap bundle includes 6 peices of closed-end coping. Closed-end revers-a-cap is not sold seperately. 12" coping bundle has 14 units of closed-end coping (7 left and 7 right) Closed-end 12"coping not sold seperately.

Pisa 2® Calculations

Pisa2® Wall
Step 1: Height of wall (includes buried course) x Length of wall = Square Face Feet
Step 2: Square Face Feet x 1.55 (units per face feet) = Number of Double Units
Step 3: Number of Double Units x Cost per Double Unit = Cost of Material

Revers-A-Cap
Step 1: Length of wall x 1.7 (units per lineal foot) = Number of Single Units Required
Step 2: Total Units x Cost per Unit = Cost of Material

Pisa2 Corner
Step 1: Height of wall in inches x Number of 90 degree corners in wall = Total Combined Inches
Step 2: Total Combined Inches / 6 (height of unit) = Single Corner Units Required
Step 3: Single Corner Units / 2 (sold by dbl. unit) = Double Units Purchased
Step 4: Double Units x Cost per Double Unit = Cost of Material

Note: Unilock provides these calculation formulas as a service for estimating material requirements. Unilock will not be held responsible in any way for resulting product overage or shortage.
Minimum Radius: The minimum outside radius for Pisa2® Tapered is 5 feet. To achieve this radius, you must use stones of the same taper on 1 layer, and stones of the opposite taper on the next layer.